Delivering your Canadian Spa Company hot tub

Once the spa has been delivered to your house, it will be placed standing up on a pallet in your driveway (similar to the picture left). These spas can weigh between 550lb to 1010lb, so be sure that you have the necessary help to bring it to your backyard (we also offer services to move the spa for you, give us a call to inquire – +44(0)1293 824094). Carefully place your spa in the location you have chosen, and remove the delivery packaging. You are almost done! If your tub requires an electrical installation – have a licensed electrician run the required 230-volt power line to the spa installation site. This power line must be permanently connected (hard-wired) to the mains supply. Do not use extension cords or plug-in type connections. At the site where the spa is to be located leave 5 meters of cable and the appropriate cable gland. All electrical wiring to a spa must be installed by a qualified, licensed electrician, and meet required electrical standards. Refer to your Owners Manual for more information, otherwise start filling up your tub with a garden hose. Once the water level has reached the topmost jet, go ahead and plug in your spa. You are now ready to enjoy your Canadian Spa Company hot tub! For further information download our Canadian Spa Pre-Delivery Guide.