How to reset the Control Unit on a Muskoka Portable Spa

Reset the Control unit – Instructions

1. Cut off power to the spa

Insert stopper caps

2. Insert the stopper caps onto the inlet and outlet on the spa inner wall

3. Disassemble pump, turn over the pump.

Press Reset button (underneath Control Unit)

4. Locate the small hole marked “reset” on the bottom of pump. Then, inset a small stick (It should be less than 9mm diameter) into the hole, press down, when you hear “ping”, the reset is successful.

Take off the stopper on the inner spa

5. Then, connect pump with spa again. Remove the stopper caps on the spa liner and restart spa.