Muskoka – How to release air from inside the pump

Use Air Purge Valve to release air from the Muskoka Pump

How to release air from the Pump (Muskoka Portable Spa):

  1. Unscrew the air purge valve counter-clockwise and let some water trickle out.
  2. After enough water has been released (approx 1 cup) close the air purge valve by screwing it back in.
  3. Dry any excessive water on the Control unit.

WARNING: Never run the pump idly. Releasing the air inside the pump is the key step to ensuring that the pump runs normally.

WARNING: The water level inside the spa must be above the highest pump connection before the spa is turned on.

Back to blog