Don’t worry, our spa has an automatic stop on the Blower function after 30 minutes.
So under normal circumstances the spa would stop after half an hour of the bubble (blower/jet massage) function running cycle. Just press the bubble button, it will start again.
When the water temperature reaches the desired setting, the heater function will automatically stop. It will restart heating system once the water temperature is 2℃ lower than the set temperature.
If however if the blower function repeatedly stops working this could be due to either an obstruction in the pipework or kinked pipes. If other ‘Error’ codes appear on the control unit display consult your Instruction Manual to diagnose the problem.