News RSS

The CRS2 Top mount cover lifter works by using a locking hydraulic shock to lift the cover off of the spa and into an upright position. When you wish to close it down you will need to be sure that you press the orange locking button to release the lift, otherwise the lifter won’t close properly and can be damaged. Furthermore by using the cover lifter incorrectly you risk personal damage as the hydraulic lift is very powerful and can cause injury. Press this button to unlock the lifter and close your spa properly Improper use of the cover lifter is not...

Read more

If you have purchased a CRS1 bottom mount cover lifter, be sure to exactly follow the steps outlined in the instruction manual, as improper installation could damage your cover lifter. The following graphic indicates the step that you should take extra care with when assembling the lifter. Be sure that the top support bars are oriented correctly, and that the long end of the right angled piece lays ACROSS the top of the spa instead of down it. If this piece isn't oriented correctly the lift won't sit in the crease of the spa cover

Read more

Your spa cover is one of the most important parts of your spa that helps to keep your temperature high, and therefore you should take care of it as much as you can. By using a proper cover lifter, you can ensure that your cover is operated properly and safely. Cover lifters are typically installed onto the side of the spa by drilling them into the cabinet panels. Some cover lifters offer a “under mount bracket” that sits underneath the spa to prevent damage to the panels. Under mount bracket used for cover lifters These may appear to be a good alternative to...

Read more

Your Canadian Spa Company hot tub will provide years of enjoyment to your family as it will regularly be used. Unfortunately with all this usage, your spa’s cabinet panels may endure some wear and tear, causing your spa to lose its original look. Why not fix your hot tub back to its original state by replacing these cabinet panels with new ones? At the Canadian Spa Company we stock many different panel sizes for each of our spas that we offer and would be happy to provide you with a quote for one. Various styles, colours and models can be ordered to help restore...

Read more

Ordering a hot tub cover can be a tricky operation, and requires that you are aware of the measurements of your spa. One dimension that is needed by the manufacturer is the cover radius, which is simply the outside radius of the corners of your spa. There are three common measurements that are used for hot tub covers as the cover mould can be expensive: 0” radius (right-angle), 4” radius and 8” radius. Various radius measurements for spa covers If you are unsure as to what the radius is of your previous cover (and you know it has rounded corners) then a...

Read more