Please select the correct size cover from the drop down list above.
82" brown cover is temporarily out of stock due 2nd week in Jan if ordered now we will put the cover on back order and send out when new stock arrives
Please note that if your existing cover measures between two of the measurements always go for the bigger option as it does not affect the insulation to overhang but if it is too small and sits on the skirting flaps the insulation will be compromised.
5"/3" Thick tapered cover for unparalleled heat retention, 5" Skirt length, Commercial quality zipper, 8 Locking straps for added protection, Tough mesh bottom with rugged reinforced stitching, Includes kerb side delivery
Description & Features
This replacement hot tub cover is made from the finest Marine Grade Vinyl with 6 re-enforced handles for added support and durability. The insulating foam inside the cover is vacuum sealed with a 6 mil. poly wrap Vapour Barrier to increase the longevity of the cover and retain the heat. An aluminium channel is fixed down the centre of the cover to provide extra strength and stability when opening the cover. Our cover includes a full length Steam Seal inside the fold along with a 5" skirt to trap any excess heat that would escape through the side of the cover and keeps it within the hot tub. The bottom of the cover is manufactured out of mildew inhibiting vinyl to prevent moisture deterioration and provides minimal water absorption. These covers are proudly manufactured in Canada and are designed to withstand the harsh winter months.
- 5"/3" Thick tapered cover for unparalleled heat retention
- 4" Radius
- 5" Skirt length
- Commercial quality zipper
- 2 mil. Vapour barrier
- 8 Locking straps for added protection
- Tough mesh bottom with rugged reinforced stitching
- Insulation R value of 18.5
- 6 Reinforced handles
- Full length steam seal
- Includes kerb side delivery in UK which additional charges applied at checkout for mainland Europe
(excludes some highland and island locations please call for quote)
CANADIAN SPA COMPANY - BECAUSE NOT ALL HOT TUB COVERS ARE EQUAL
THE BEST QUALITY COVERS AT THE LOWEST PRICES
STOCK COVERS - DELIVERED DIRECTLY TO YOUR DOOR
Our Covers will fit Spas such as:
Jacuzzi, Hydro Spa, Gulf Coast, Dimension One, Coleman, Caldera, Beachcomber, Artesian Spa, Artic Spa, Coast Spa, L.A. Spa, Marquis Spas, Saratoga Spas, Soft Tub, Southwest Spa, Spaform, Sundance Spas, Vita Spas, Canspa, California Spa, Cal Spa, Hydropool, Agean Spas, Clearwater spas, Diamante Spas, Elite Spas, PDC Spas, Dynasty Spas, Monarch Spas,Tiger River Spas, Garden Leisure Spas, Vita Spas, Sunbelt Spas, Phoenix Spas, Watkins, Hotspring Spas, Sunrise Spas, Dream Maker Spas....
...and many more !!!
5 " > 3 "Quality Ratio - 5" Core insulation thickness for top rating and 3 "taper for rainwater run off
Foam Thickness: 5" 1.5 LB foam / Type II (2) - Expanded Polystyrene Insulation: R 22.75
Always look at the density or thickness of your cover before you purchase.
If you go for a flat 3" density cover this will give low insulation properties and you will get rainwater pooling on the surface.
Most suppliers will only offer up to a 4/3" Ratio - Why settle for less when ours are Canadian manufactured and are 5/3 Ratio which will offer superior insulation and subsequent energy savings.
Heat Saving Seal Pillow - Reducing heat loss and Improving the efficiency of your spa
Heat has a great way of finding any route it can through your cover!
The most vulnerable part of your cover is along the fold and if this area is unprotected heat will escape along the length of the fold.
Our covers have a continuous heat seal pillow that runs the full length of the fold to fully insulate and keep running costs down.
Don't be fooled when you see end caps on the outer points of the fold, this is just for show!.. the pillow should run the full length of the fold to be efficient.
8 x Triple Strength Locking Straps - Built to maintain continued use
Our covers will come with both Male & Female part of the locking clip so you will be able to secure the locking straps to the relevant position on your hot tub
All covers should have lockable Straps with Buckles for safety and storage
8 x Locking Buckles - For complete safety and storage
If you see any covers offered without lockable straps please do not purchase as they will not comply with health and safety!
Some manufactures offer locking straps as extras .. this will bump up the final price you pay.
6 x Sturdy, Reinforced Handles - Triple folded reinforced vinyl backed up with double-stitched seams for the sturdiest of handles end and side
The positioning and the amount of handles will greatly enhance the operating experience of your cover.
Our handles are positioned so at any one time you will be able to access and grip two handles to ensure ease of cover operation
Some manufactures offer handles as extras .. this will bump up the final price you pay.
Insulating Polystyrene Core - Our expanded polystyrene has top-rated insulation properties
6 mil Poly Wrap Vapour Moisture Barrier - The Plastic wrap prevents moisture from reaching the foam core
Our 5/3" ratio foam core's tapered design gives optimum heating and insulation whilst the taper keeps rainwater off the spa cover
The insulating foam inside the cover is vacuum sealed with a 6 mil. poly wrap Vapour Barrier to increase the longevity of the cover and retain the heat
The Vapour/Moisture Barrier will prevent water ingress from above elements and water vapour from below. This will stop your cover getting waterlogged and heavy.
Marine Grade Vinyl - Tough and resilient, 100% polyester backing, mildew Treated face and back
Tough Bottom - To Ensure the durability of the cover
The bottom of the cover is manufactured out of mildew inhibiting vinyl to prevent moisture deterioration and provides minimal water absorption
Durable Reinforced Hinge - The aluminium channel reinforcement at the cover hinge adds strength and durability
An aluminium channel is fixed down the centre of the cover to provide extra strength and stability when opening the cover
The material we use avoid any possible rusting and strengthens the centre of your cover
Commercial Quality Zipper - Heavy-duty 45 nylon zip chain and aluminium pulls
Tough and durable zips to ensure the integrity of the inner core
We only use commercial quality materials that wont weather or rust
Insulating / Protective Skirt
Our covers come with a 5" skirt to further enhance the insulation qualities and provides protection against the elements
Rugged Reinforced Double Stitching - Adds durability
Our covers are built to last and the stitching is 92lb bonded polyester thread with UV protection
Ensuring the exterior holds together through all weather conditions or physical stress
A little soap and water does it
Guarantees the product performance warranty for (2) two years from date of purchase on Both materials and workmanship
Two different colours to choose from. Brown and Grey
COMPARE US TO THE REST - WE ARE THE BEST
WHAT OTHERS SELL AS OPTIONAL EXTRAS ALL OUR COVERS ARE FULLY FEATURED AND ARE INCLUDED AS STANDARD AT NO ADDITIONAL COST
Featuring 5 > 3 "ratio quality - 5" core thickness for top insulation properties, tapering to 3 "to allow rainwater run off
With the highest energy efficiency, maximum strength, load rating, and moisture resistance, plus exceptional longevity, our replacement covers are the finest you can buy spa cover.
It's designed to stand up to extreme weather conditions, warm or cold, rainy, snowy, or dry.
Over its lifetime, the energy savings could add up to double the cost of the cover, depending on your electricity rate.
If you want a first-rate hot tub cover at a great price, Canadian Spa Company is your best choice.
Questions & Answers
Q. How long is the warranty for this cover?
A. Our covers are protected by a 24 month warranty. Please contact us for any warranty issues (01293 824 094)
Q. Is a 8" radius corner available?
A. All of our covers have a 4" radius corner which will result in a small over hand on an 8" radius spa. This will still be compatible and will not affect the insulation of your cover
Q. Our hot tub is 86" square, a 2 1/2" high lip and then a flair of 2" out of wood surround 2 1/2 " high. Will your 5" skirt cover this total area?
A. Based off the measurements you have provided, one of our 90" x 90" covers would be compatible with your spa. This would ensure that the skirt completely covers the outside lip of your spa and doesn't compromise the insulations. This larger cover may overhang slightly but that doesn't affect the insulation properties of the cover. Any questions please give us a call (01293 824 094).
Q. Do you have a cover that works for a 12" radius?
A. All of our covers have a 4" radius corner which will result in a small over hand in the corners on an 12" radius spa. This will still be compatible and will not affect the insulation of your cover.
Q. I have a cover 93x90 would a 94x94 fit?
A. A 94" x 94" cover would fit over a 93" x 90" cover but there will be approximatley 2" of overlap on one side and 1/2" of overlap on the other side. This will not affect the insulation value of the cover as the 5" skirt will help seal in the heat.
Q. Can the cover be used with an existing support (lifter) with screw?
A. All our covers are 100% compatible with standard cover lifters.
Q. Since my cover is 93 x 90 should I choose a new cover 93x93?
A. A 94" x 94" cover may not fit your spa exactly, but the extra overhang won't cause heat loss problems. If you have any additional questions feel free to contact us directly on 01293 824 094.
Q. My hot tub measures 88.5 x 88.5; this is from outer most edges on the side of tub. Would the 90 x 90 work?
A. What is the measurement of your previous cover and how well did it fit? If your previous cover fit fine I would recommend that you order a cover that is close to is size. Otherwise a 90" x 90" would work but there will be a slight overhand on the sides ( approx 0.75") Feel free to give us a call on 01293 824 094 is you have any additional questions.
Q. What are the R rating differences?
A. The maximum R Value obtainable for a Hot Tub Cover that is made with Expanded Polystyrene Insulation that is approved for sale in Canada is as follows:
Foam Thickness: 1" 1.5 LB foam / Type II (2) - Expanded Polystyrene Insulation: R 4.55
Foam Thickness: 2" 1.5 LB foam / Type II (2) - Expanded Polystyrene Insulation: R 9.1
Foam Thickness: 3" 1.5 LB foam / Type II (2) - Expanded Polystyrene Insulation: R 13.65
Was looking elsewhere, but discovered it was available here. Great price. Great product. Delivered two days later. Perfect fit. Quality seems excellent. Durability is tough to predict. As Yogi says, "Tough to make predictions, especially about the future." Nothing else to say.
The first one arrived damaged in transit. Everyone was most helpful in its return. We ordered another. It arrived on time, intact and is a very good product. The fit and finish are first class. The Canadian Spa price beat all others and free shipping was a bonus. I would buy this item again. I fact, I did.
My original 92" cover only lasted 2 years. It was soaked and weight about 100 pounds!!!. After comparing my options throughout the net, I finally choose between another company\'s offer and this one. I'm so happy I choose canadian spa. It arrived within the week, it is a perfect fit, the lip (sides) provide a nice seal because they are longer than others, and the 5" center does not add any weight (it is so light...) even though it is as thick as it gets. This is a much better product than my original. I can't speak for the durability yet, but the thermal capacity is way better than my previous cover.
Local pools supply stores wanted A LOT more what they said would be a custom ordered product. I'm guessing they get them from Canadian Spa Company who makes these. (Checked & it is cheaper to buy through Canadian Spa directly) Love the lid, a thousand times better than the old thin flat one we had. Great design in that it slopes down from the middle to allow water to run off.
This product was ordered on-line on a Sunday evening 16th March 2014, it was delivered Tuesday am 18th March 2014 , super-fast delivery, the lid fits like a glove in fact it fits better than the original from another manufacturer. quality looks to be high standard. I would recommend the stretch cover too as this will protect during the winter months. My original had absorbed water into the polystyrene blocks and weighed in excess of 50 KG. this new replacement feels so light and much more manoeuvrable. would also like to mention customer service was second to none. great people to deal with. Great customer service. Great Product. Super-fast Delivery. Richard, KENT