Balboa GS501Sz Power Pack (54515)

Balboa GS501SZ Spa Control Box 3.0kw

This GS501SZ Balboa control box allows you to control a spa that either has a two pump or one pump and air blower system. This can be used as a replacement for an existing GS501SZ control box or used as part of a retro fit system when combined with a Serial Standard Balboa topside control panel.

This control box comprises of circuit board, 3kw heater with the latest M7 sensor Technology.

* Note: This control box is only compatible with Balboa Serial Standard Topside Control Panels *

This Control Box Operates

- Pump 1 - One Speed or Two Speed (One Speed in Circ Pump Used)

- Pump 2 - One Speed or Air Blower

- Circ Pump - 24hr Operation (Used as low speed on Pump 1)

- Air Blower - ON/OFF (If no Pump2)

- Ozone - Yes

- Heater - 3Kw M7

- Light - 12 Volt

- TV / Radio - 230 Volt Point Available

- Flow Detection - Latest M7 Sensors

Electrical Connections

Components such as pumps are plugged directly onto the PCB with AMP connectors.

Plumbing Connections

2 Inch socket unions at each end of the heater assembly to be glued onto 2 inch pipe (60mm diameter). When replacing existing control box simply remove socket unions and thread onto the existing pipework on your spa.

Compatible Canadian Spa Topside Controls

Balboa VL701s 7 button Topside - p/n: 54112-02

The VL701S keypad is compatible with the Balboa GS501SZ, GS510SZ, GS511SZ and GS520SZ control systems. This is a very common keypad, with seven buttons in its standard configuration:

• Blower
• Mode
• Jets 1
• Jets 2
• Light
• Warm
• Cool