Know your spa jets/controls (Toronto hot tub model)

HOW SPA JETS WORK

Air is mixed with the water by using the air controls creating a gentle to most vigorous massage. Water flow is adjusted by simply turning the outer face of the full sized jets. Our hot tubs have a combination of pulsating, rotating, and directional adjustable jets.

JET & CONTROL FUNCTIONS:

2” Directional jet: Adjustable and interchangeable jet features a directional nozzle. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

2″ Twin Rota jet: Adjustable and interchangeable jet spins and pulsates. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

2” Point jet: Standard jet is permanently on and supplies heated water continually. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

3″ Directional jet: Adjustable and interchangeable jet features a directional nozzle. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

3″ Massage jet: Adjustable and interchangeable jet which spins to deliver a soothing massage. The jet can be removed by turning it counter- clockwise. To replace the jet push inward and clockwise until it clicks into place.

5″ Massage jet: Adjustable and interchangeable jet features an internal spinner to deliver a low pressure soothing massage. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

5″ (Jumbo) Directional jet: Adjustable and interchangeable jet features a directional nozzle. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place

Circulation Jet: Supplies Ozone and heated water from the circulation pump.

Air Jet (pepper pot): Linked to the blower to inject air into the spa for an invigorating massage.

Large Diverter: Located on the topside of the spa, this valve physically diverts the flow of water from one jet zone of the spa to the other.

Air Controller: These are located around the top of your spa. Increase or decrease the force of your jets by opening or closing the air control valves. If the jets still feel weak with the air controls open, work through our guide to fixing weak or dead jets.

Waterfall control: Located on the topside of the spa, this valve adjusts water flow to the waterfall.

Aroma basket cap: Open cap to place aromatherapy beads. Close after use.