Swim Spa Gold Full Maintenance Service

It is recommended every year to ensure maximum performance.

(Swim Spa must be full of water on arrival)

• SPA FLUSH is added to water to clear pipes, SPA SHOCK and ANTI Scale is then added shortly after

Your pipes will build up a layer of calcium, dirt and Body Fats which will continue to build up and reduce the power of water flow. These chemicals will help to loosen and break down the build up in the pipes before emptying the spa.

• Filters are removed and put into soak using our Filter cleaner

The filters cleaner will clean and remove contaminants from the filter fibres. The filters may need to be replaced; the Technician will inspect and inform you if this is the case – filters can be purchased from Technician on site

• Maintenance Check of Electrical parts (Full Consumption Function Test)

Pumps, blower and heater are electronically tested. Parts are checked over for leaks, wear and tear, noises. Circuit board is tested to make sure all functions are within limit.

• Plumbing leaks

Pumps/blowers are run to see if any leaks are found on plumbing (please be aware that if spa is fully foamed - we cannot remove foam but can test areas for wetness) Pump/heater gaskets will be fitted if needed

• Spa is then powered down, emptied, cleaned, hosed down and then vacuumed out

The spa will be emptied using our submergible pump and cleaned while being emptied. The vacuum will clear all dirty water and vacuum out each jet to remove any dirty water from pipe work.

• Cabinet wash and clean down

The cabinet/panels are wiped down and hosed off. Vacuum is used to clean inside cabinet of any loose foam, dirt, cob webs etc..... (We will not be able to remove any Pests from cabinet – this will be up to the customer to sort)

• Acrylic surface is polished clean before refill
• Refill is started using the customer's water hose

Please note: because of the large water capacity of a swim spa, the spa cannot be fully refilled within the service visit. The technician will start the refill and leave it running on departure. Once the spa is full, final commissioning — bleeding the air from the pumps and balancing the water — is completed by the customer.

The technician will explain this and leave clear instructions before leaving. This is the standard process for a swim spa service and does not require, or include, a return visit.

• Guidance provided for final air-bleed and commissioning once the spa is full
• Water-balancing advice provided for the customer to complete using their own chemicals once full

The technician will have all chemicals available to purchase on the day if needed.

• Cover Cleaned - Cover is wiped clean and hosed down

(Please be aware that any faulty parts needed or suggested while doing the services are not included within this price)

NOTE TO CUSTOMER: Please be aware

It is up to the customer to make sure all sides are accessible for panels to be removed for the technician to perform his job. The technicians are not allowed to remove decking or objects which are restricting access to spa.

If the spa has a Gazebo fitted or spa is sunk into the ground which is restricting access the technician will only be able to perform part of his duty.