How to change a pump on a Canadian Spa Hot Tub (Toronto Model)

How to change a pump on a  Canadian Spa Hot Tub (Toronto Model)

TOOLS NEEDED: Phillips CH3 screwdriver, 13mm spanner head, oil filter grip (available at large hardware retailers), Wire- cutters.

IMPORTANT: SWITCH OFF ELECTRICAL SUPPLY BY DISCONNECTING THE PLUG AT THE  SOCKET OR ISOLATION SWITCH. Please contact a qualified electrician if you need assistance or contact us at  Canadian Spa

STEP 1 – Unscrew side panels to access pump on the fascia with air vent and the MP3 Player housing

STEP 2 – Remove panel strips and side panels (on the ‘touch pad ‘ side)

STEP 3 – Uncouple on/off switch to MP3

STEP 4 – Shut down both gate valves to isolate water

STEP 5 – Unscrew Power pack cover using a Phillips screwdriver

STEP 6 – Remove clamp to wire – unplug pump plug from circuit board (ensure cable ties are removed from plumbing)

STEP 7 – Unscrew earth wire from pump (ensure wire is moved safely away from pump area)

STEP 8 – Remove all 4 nuts from pump base using a 13mm spanner head

STEP 9 – Undo pump union joints using an oil filter grip (available at large hardware retailers).

STEP 10 – Lift pump off the 4 screw pump base and replace with NEW pump ensuring the screw heads are aligned with pump holes

STEP 11 – To re-assemble reverse the above sequence