Know your spa jets/controls (Toronto hot tub model)


HOW SPA JETS  WORK

Air is mixed with the water by using the air controls creating a gentle to most vigorous massage. Water flow is adjusted by simply turning the outer face of the full sized jets. Our hot tubs have a combination of pulsating, rotating, and directional adjustable jets.

JET & CONTROL FUNCTIONS:

2 " Directional Jet

2” Directional jet: Adjustable and interchangeable jet features a directional nozzle. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

2" Twin Rota jet

2″ Twin Rota jet: Adjustable and interchangeable jet spins and pulsates. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

2" Point jet

2” Point jet: Standard jet is permanently on and supplies heated water continually. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

3" Directional jet

3″ Directional jet: Adjustable and interchangeable jet features a directional nozzle. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

3" Massage jet

3″ Massage jet: Adjustable and interchangeable jet which spins to deliver a soothing massage. The jet can be removed by turning it counter- clockwise. To replace the jet push inward and clockwise until it clicks into place.

5" Massage jet

5″ Massage jet: Adjustable and interchangeable jet features an internal spinner to deliver a low pressure soothing massage. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place.

5" (Jumbo) Directional jet

5″ (Jumbo) Directional jet: Adjustable and interchangeable jet features a directional nozzle. The jet can be removed by turning it counter-clockwise. To replace the jet push inward and clockwise until it clicks into place

Circulation jet

Circulation Jet: Supplies Ozone and heated water from the circulation pump.

Air Jet (pepper pot)

Air Jet (pepper pot): Linked to the blower to inject air into the spa for an invigorating massage.

Large Diverter

Large Diverter: Located on the topside of the spa, this valve physically diverts the flow of water from one jet zone of the spa to the other.

Air Controller

Air Controller: These are located around the top of your spa. Increase or decrease the force of your jets by opening or closing the air control valves.

Waterfall control

Waterfall control: Located on the topside of the spa, this valve adjusts water flow to the waterfall.

Aroma basket cap

Aroma basket cap: Open cap to place aromatherapy beads. Close after use.