Replace an amplifier on a hot tub (Canadian Spa – Toronto model)

TOOLS NEEDED: Drill, Phillips CH3 screwdriver, Wire cutters, insulation tape, 4 x 5A connection strips, small flat screwdriver.

IMPORTANT: SWITCH OFF ELECTRICAL SUPPLY BY DISCONNECTING THE PLUG AT THE SOCKET OR ISOLATION SWITCH. Please contact a qualified electrician if you need assistance or contact us at Canadian Spa

STEP 1 – Remove panels below Touch pad (to get access to MP3 panel housing on/off button)

 STEP 2 – Unscrew nut and then unplug on/off connection from amplifier

STEP 3 – Remove wiring from MP3 housing.

STEP 4 – Disconnect power supply lead from amplifier by pulling plugs apart.

STEP 5 – Cut Black/Red and Red wires on amplifier wires.

STEP 6  – Unscrew amplifier from cabinet.

STEP 7 – Re-screw NEW amplifier onto cabinet

STEP 8 – Remove insulation cover from wires.

STEP 9 – Insert wires into 5A connection blocks (Red to Brown and Red/Black to Grey).

STEP 10 – Insulate tape connector and wire

STEP 11 – To re-assemble follow steps 4-1